Begode ET Max – 168 Volts EUC – Beyond The Limit
Begode ET Max – Thoroughly Tempered!
168 volts – SMART BMS – 130mm suspension travel
Breaking through the limits once again, in order to achieve faster speed and super torque, Begode team has accumulated years of scientific research and technology, and through repeated trials and tribulations, ET MAX has emerged!
Motor power:
The newly developed customized tile shaped magnetic steel generates a strong magnetic field, allowing torque to break through and increase once again.
The Begode ET MAX’s 4,500 W tile type High Torque Motor is capable of accelerating quickly and providing enough power to climb steep slopes. No loading speed is 180 km/H.
Is equipped with a high speed street tire 90/90-14.
Battery:
168V 3000Wh battery (SAMSUNG 50S or SAMSUNG 50GB)
Charge:Â
The charging port supports up to 20A charge and also supports 20A output 2 parallel and 2 series to ensure the stability of the power system BMS intelligent battery pack monitoring and management system.
GX20-4P Dual charge ports support – Max 20A charging
Charger: 168V 5A – Charge time: 5h (5A)
This new electric unicycle features a Smart Battery Management System (BMS) that monitors the real-time information of each cell in the battery pack. This allows the BMS to detect any battery abnormalities, such as overcharging, overcurrent, or short circuit, and promptly alert the rider with recommended actions. This ensures the rider’s complete safety throughout the journey.
The BMS also has a balancing function that helps to equalize the voltage of each cell in the battery pack. This helps to prevent battery voltage differences, which can lead to potential unknown risks. The balancing function is especially important for electric unicycles that use lithium-ion batteries, which are prone to voltage imbalance.
Reinforced controller:
The motherboard adopts more 48MOSFETs, the control chip is upgraded, and the tenth generation main control MCU is used to further improve the performance of the motherboard.
ET Max uses the latest reinforced controller, which has ultra-high load capacity and better performance in extreme races and off-road situations, with higher speeds and stronger torque.
Firmware upgrades:
Supported by powerful hardware, the new firmware debugging makes both racing and off- road modes more professional. Off road mode will output greater torque, making it more suitable for climbing and leaping.
The racing mode is faster. The racing mode supports maximum speed adjustment.
Supports linear adjustment of the left and right tilt angle shutdown protection angle, motor blockage protection, and firmware upgrade stability improvement.
Latest Begode suspension system:
After multiple iterations, the Begode shock absorber has made a fundamental leap in improvement. The spring is increased to 130mm, strengthening the piston shaft and rod, and the bi-directional damping is infinitely adjustable, allowing for smooth handling in various applications such as racing, jumping, and off-road.
This DS200-55 shock has two knobs that adjust the damping speed in both the up and down directions. Especially the downward damping can greatly absorb the force of high-speed impact landing, making high jumps easier.
Begode’s fully independent research and development, lockable suspension more suitable for race!
Credits: Dongguan Begode Intelligent Technology Co., Ltd.
